Controls and Features
Wine Chiller
Temperature control
Do not install the wine chiller where the ambient temperature will go below 55°F (13°C) or above 90°F (32°C).
The RED WINE setting will provide a storage temperature of approximately 55ºF (13ºC), which is optimum for the storage for red wine.
The WHITE WINE setting will provide a storage temperature of approximately 7ºC, which is optimum for white wine.
As with any refrigeration product, there is a slight temperature variance at different locations within the cabinet.
Temperatures at the bottom of the cabinet will be cooler than temperatures at the top of the cabinet.
Position your wine inventory accordingly (i.e. white wines in the cooler zones and red in the warmer zones).
To set the control, turn it to the RED WINE setting. Once the bottles are loaded, allow at least 24 hours before making any adjustments to the initial setting.
Interior light and switch
The interior light makes it easy to view your wine labels and enhances the display of your collection.
When the switch is in the OFF position, the light comes on only when the door is opened. When the switch is in the ON
position, the light remains on continuously for your maximum viewing pleasure.
For best viewing do not store a bottle on the top shelf directly under the light. Remember to turn off the light when it is no longer needed.
Removing full extension drawers
All of the full extension drawers pull out so bottles can be conveniently added or removed.
Any of the full extension drawers can be removed to store larger bottles.
To remove:
1.Pull the full extension drawer out to the STOP position.
2.Push the tab on right drawer guide down while pulling the tab on left guide up, and pull the drawer out.
To replace:
1.Push the drawer slide arm back into the unit.
2.Pull the small slide sub assembly completely forward.
3.Insert the sides of the drawer back into the guides.
4.Push until the tabs lock into place.
Tab (push tab down on right drawer guide, pull tab up on left drawer guide)
To replace, push drawer slide | Pull small slide sub assembly |
arm back into unit | completely forward |
NOTE: Make sure the tabs on the full extension drawer guides are fully engaged before loading any bottles. Pull the drawers out all the way to the STOP position and push back in several times to make sure locking tabs are properly engaged.
6
