If you received
adamaged appliance
| Consumer Information | |
|
|
|
|
| Wine Chiller |
The warranty does not cover damage | Immediately contact the dealer (or builder) | |
caused after delivery. | that sold you the wine chiller. | |
Remove packaging
Before using, be sure all packing materials | new appliances is an application of | |
and tape have been removed. | household liquid detergent. Apply with a | |
To assure no damage is done to the finish | soft cloth and allow to soak. Wipe dry and | |
then apply an appliance polish to | ||
of the product, the safest way to remove | ||
thoroughly clean and protect the surface. | ||
the adhesive left from packaging tape on | ||
|
After installation is completed
•Promptly inspect your new Monogram Wine Chiller. If it has been damaged, contact the Installer or Dealer immediately.
•This Wine Chiller must be properly leveled to ensure correct door alignment and door closure. Contact the Installer if the unit is not level.
•The unit should be centered in the opening. The front face of the door should be 25 mm forward of adjacent cabinetry. Contact the installer if clearance is not correct.
•Test the door swing. Carefully open and close the door. The door should not rub or catch on adjacent cabinetry. Notify the installer if the door makes contact with cabinetry.
Please Contact the Installer or Dealer if you experience any of these problems.
Your Wine Chiller is shipped with a black toekick on the front of the unit. For shipping purposes, an optional stainless steel toekick is secured to the back of the unit. That toekick should have been removed and installed, or given to you. Keep the unused toekick and other unused or removed parts for possible future use.
3
