Using Your Cooktop
Radiant Cooktop
How to set the controls
Push the knob down and turn in either direction to the setting you want. When the control is in any position other than OFF, it may be rotated without pushing it down.
At both OFF and HI the control “clicks” into position. You may hear slight “clicking” sounds during cooking, indicating the control is keeping the power level you set.
The controls for the radiant surface elements can be set anywhere between LO and HI for an unlimited number of heat settings. With the infinite switch the elements cycle on and off to maintain your selected control setting.
The ON indicator light will glow when any surface element is on.
Cooktop temperatures increase with the number of surface elements that are on. With 3 or 4 elements turned on, cooktop temperatures are high, so be careful when touching it.
A HOT SURFACE indicator light will glow when any radiant element is turned on and will remain on until the surface is cooled to approximately 150°F.
NOTE:
•It comes on when the element is hot to the touch.
•It stays on even after the element is turned off.
•It glows brightly until the element is cooled to approximately 150°F.
Push the knob down and turn in either direction
to the desired heat setting.
11
