INSTALLATION INSTRUCTIONS

BEFORE YOU BEGIN

Read these instructions completely and carefully.

IMPORTANT–OBSERVE ALL GOVERNING CODES AND ORDINANCES.

NOTE TO INSTALLER: Be sure to leave these instructions with the consumer.

PARTS LIST

Cooktop

5 burner grates

5 burner caps

Pressure regulator with attached 1/2″ to 3/8″ reducing bushing and 3/8″ pipe nipple

2 clamping brackets with screws

Attached 120 volt grounded plug cord

Self adhesive gasket

TOOLS AND PARTS NEEDED

Large flat blade screwdriver

Saw

Carpenter’s square

Pipe wrench

Gas line shut-off valve

Pipe joint sealant that resists action of LP gas

For flexible connection where local codes permit:

Flexible metal tubing (same 3/4″ or 1/2″ I.D. as gas supply line)

Flare union adapter for connection to supply line (3/4″ NPT x 3/4″ I.D. or 1/2″ NPT x 1/2″ I.D.)

Flare union adapter for connection to regulator (1/2″ NPT x 3/4″ I.D. or 1/2″ I.D.)

For rigid connection:

• Pipe fittings as required

IMPORTANT SAFETY INSTRUCTIONS

The cooktop has been design certified by the American Gas Association. As with any appliance using gas and generating heat, there are certain safety precautions you should follow. You’ll find these precautions in this Use and Care Guide; read it carefully.

Be sure your cooktop is installed properly by a qualified installer or service technician.

The cooktop must be electrically grounded in accordance with local codes, or in their absence, with the National Electrical Code ANSI/NFPA No. 70–Latest Edition.

Installation of this cooktop must conform with local codes, or in the absence of local codes, with the National Fuel Gas Code. ANSI Z223.1–Latest Edition.

Disconnect electrical supply before servicing.

Make sure the wall coverings around the cooktop can withstand heat generated by the cooktop up to 200°F.

Avoid placing cabinets above the cooktop. To reduce the hazard caused by reaching over the open flames of operating burners, install a ventilation hood over the cooktop that projects forward at least 5″ beyond the front of the cabinets.

If cabinets are placed above the cooktop, allow a minimum clearance of 30″ between the cooking surface and the bottom of unprotected cabinets.

If a 30″ clearance between cooking surface and overhead combustible material or metal cabinets cannot be maintained, protect the underside of the cabinets above the cooktop with not less than 1/4″ insulating millboard covered with sheet metal not less than 0.0122″ thick.

Clearance between the cooking surface and protected cabinets MUST NEVER BE LESS THAN 24″. The vertical distance from the plane of the cooking surface to the bottom of adjacent overhead cabinets extending closer than 1″ to the plane of the cooktop sides must not be less than 18″. (See Dimensions and Clearances illustration in this section.)

FOR YOUR SAFETY

IF YOU SMELL GAS:

1.Open windows.

2.Don’t touch any electrical switches.

3.Extinguish any open flame.

4.Immediately call your gas supplier.

FOR YOUR SAFETY

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.

(continued next page)

11

Page 11
Image 11
GE Monogram ZGU651, ZGU650 manual Installation Instructions

ZGU651, ZGU650 specifications

The GE Monogram ZGU650 and ZGU651 are premium gas cooktops that embody sophistication and performance, ideal for culinary enthusiasts and professional chefs alike. These models stand out with their sleek design, incorporating brushed stainless steel finishes that not only enhance the aesthetic of any modern kitchen but also ensure durability and ease of cleaning.

A key feature of both ZGU650 and ZGU651 models is their powerful cooking capabilities, equipped with four high-performance burners that deliver intense heat and precise control. The front burners are capable of generating up to 20,000 BTUs, providing the flexibility to sear meats at high temperatures or simmer sauces delicately. Additionally, these cooktops feature a powerful 5,000 BTU simmer burner, perfect for melting chocolate or preparing delicate sauces without scorching.

The ZGU650 and ZGU651 are designed with versatility in mind, showcasing a variety of burner sizes to accommodate different cookware. The sealed burners help to contain spills, making cleanup straightforward after extensive cooking sessions. Both models also come with a continuous grates system, allowing for easy movement of pots and pans across burners without the need to lift them.

Safety is paramount in the design of these cooktops, featuring electronic ignition that ensures a reliable spark every time. Moreover, each burner includes a flame failure system, which automatically shuts off the gas supply if the flame goes out, providing peace of mind to the user.

In addition to their functional attributes, these cooktops incorporate advanced technology for added convenience. They come with a stylish and intuitive control panel, providing precise temperature control and ensuring a seamless cooking experience. The LED indicator lights are designed to enhance visibility, allowing chefs to easily monitor the status of their burners.

The ZGU650 and ZGU651 are designed for easy installation and integration into various kitchen layouts. They boast a compact design, ensuring they fit seamlessly into both large and small spaces without compromising performance.

In summary, the GE Monogram ZGU650 and ZGU651 gas cooktops are perfect for those who appreciate elegance combined with high-performance features. With their powerful burners, safety features, intuitive controls, and stylish design, these cooktops are sure to elevate the cooking experience in any home. Whether you are whipping up a gourmet meal or enjoying a casual dinner, these cooktops are engineered to meet the demands of every culinary endeavor.