GE Monogram ZIFP360NX dimensions GE Monogram 36 Built-In Professional All-Freezer

ZIFP360NX

GE Monogram® 36" Built-In Professional All-Freezer

Dimensions and Installation Information

35"

Case Width 25-3/4" Stainless Steel Models

Case Depth

*83-1/2"	*84" From
	Floor to
at	Top Frame
Rear

36" Frame to Frame Width

Depth Including Handles:

27-3/4" Stainless Steel Models

28-11/16" Professional Models

*Shipping height. The freezer can be adjusted to fit into a cutout 83-1/2" min. to 84-1/2" max. height. Note: the top case trim at the front is 1/2" higher and will overlap upper cabinetry or soffit. Use leveling legs and wheels for a maximum 1" height adjustment.

Product Clearances

These units are equipped with a 2-position door stop. The fac- tory set 130˚ door swing can be adjusted to 90˚ if clearance to adjacent cabinets or walls is restricted. Order WX14X99 door stop for precise settings between 90˚and 130˚.

ZIFP360NXRH, Freezer

Handle on the left side, the door swings left to right.

ZIFP360NXLH, Freezer

Handle on the right side, the door swings right to left.

Caution

These units are top-heavy and must be secured to prevent the possibility of tipping forward. Anti-Tip protection is required.

130ϒDoor Swing

25" Minimum to Wall

90ϒDoor Swing	23-7/8"
	Behind Frame

36-3/4"

5" Min. to Wall

The water and electrical supply must be located as shown. The finished cutout width must be 35-1/2".

Note: The case trim overlaps cabinets at the top and sides. Frameless cabinets may require filler strips to prevent interference with cabinet door swing. The opening width must allow for filler strips.

Allow 25" minimum clearance for a full 130˚ door swing. Allow 15" for pan removal. for a 90˚ door swing, allow 5" minimum clearance for professional models. If the 90˚ doorstop position is used, pan access is maintained but pan removal is restricted.

For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000.

Listed by

Underwriters

Laboratories

Specification Created 6/08 110151