Monogram.™
Custom Door Panel Dimensions Using Standard Trim
1/4" thick panels or
Panels secured to 1/4" thick backing
35-1/16"
1/4" Thick
Custom Panel
Important: Maximum panel is 50 pounds
ZIF36N Freezer
•1/4" Panel: Cut panels to size.
•Custom handle with 1/4" door panel requires Trim kits ZKHR1 or ZKHRSS1 for tubular stainless steel handles.
Standard Trim with Panels secured to 1/4" thick backing
•Applying a raised panel design to a 1/4" thick backing (screws or glued): Cut 1/4" thick panels to size. Fabricate the raised panel to permit at least
2" fingertip clearance of the standard handle.
Note: ZKHTR1 custom handle kit cannot be used in this configuration.
Custom Grille Panel
35 1/8"
8" | 1/4" Thick Panel |
|
|
The grille panel frame is factory assembled for 84" installation height. If installation height varies, order ZGC2 trim kit that provides optional side trim pieces. Cut grille panel to sizes shown below.
| Installation Height | Panel Height |
Raised Panel on 1/4" Thick Backing | ||
Using Standard Handles |
|
|
|
|
1/4"
Thick
Backing
Appearance Panel
2" Clearance handle Side
5/16" Clearance |
Raised Panel |
on 1/4" Thick |
Backing With |
Standard |
Handles |
5/16" Clearance |
5/16" Clearance
For answers to your Monogram,® GE Profile Performance Series,™
GE Profile™ or GE appliance questions, call GE Answer Center® service, 800.626.2000.
Specification Created 8/00
Listed by
Underwriters
RLaboratories