![](/images/backgrounds/70484/bg5.png)
5
Design Information
36" Stainless Steel Refrigerators, Freezers
Installation
At End-of-Run
Frameless
Cabinets
Note: 1/2" thick side panels shown.
Side panels can be any thickness.
Add side panel thickness to outside
trim width, (36” or 72" for two
models) to calculate the rough-in
dimension. The leading (front) edge
must be finished to match
surrounding cabinetry.
Side panels, 1/2" minimum thickness are required
when using frameless cabinets. The side panel
acts as a spacer between the cabinet and the
case trim and prevents interference with cabinet
door swing. The leading (front) edge must be
finished to match surrounding cabinetry.
1/2" To 3/4" Side Panels. Leading
Edge Flush With Cabinet
Refrigerator or Freezer
Refrigerator and Freezer
installed side-by-side
37"1/2" ThickSide Panels36"Finished Dim.Roughed-In Dim.Cabinet
Refrigerator
Cabinet
Refrigerator door
73"
1/2" Thick
Side Panels
72"
Finished Dim.
Rough-In Dim.
Refrigerator
Cabinet
Refrigerator door
ZIRS36N RH, Refrigerator
ZIFS36N RH, Freezer
Handle on the left side, the door swings left to right.
ZIRS36N LH, Refrigerator
ZIFS36N LH, Freezer
Handle on the right side, the door swings right to left.
Product
Dimensions
CAUTION
PRUDENCE
Refrigerators are much heavier at the top than at
the bottom – be extra careful when moving.
Les réfrigérateurs sont beaucoup plus lourds en
haut qu'en bas. Il faut être prudent lors des
déplacements.