Installation

Warming Drawer

Provide

Cabinet

Support

2"x 4" or Equivalent Runners

23-1/2"

22"

27"

2"x 4" or Equivalent Runners

23-1/2"

25"

30"

Important: When installed below a single or double oven, check to be sure that any oven supports above the cutout do not obstruct the 23-1/2” required depth of the warming drawer cutout.

•A 2” min. clearance between oven and warming drawer cutouts are required. Additional clearance may be required if 2 x 4 blocks are used to support runners or solid floor of the oven above.

•The warmer drawer may be supported by either a solid bottom, 2 x 4 or 2 x 2 runners.

•The support must be level and rigidly mounted, flush with the bottom edge of the cutout.

–There is no way to level the drawer once it has been installed. Be sure supports are level.

•The entire weight of the drawer is supported by the runners or solid floor and must be capable of supporting 150 lbs.

Step 1

Install

Anti-Tip

Brackets

WARNING:

ANTI-TIP PRECAUTIONS

An anti-tip brace must be installed to prevent the drawer from tipping forward when opened and loaded. Failure to do so could result in personal injury.

PRÉCAUTIONS

CONTRE LE BASCULEMENT

 

 

 

 

 

 

 

 

 

 

Install

 

 

 

 

 

 

 

 

 

 

2x4 or 2x2

 

 

 

 

 

 

 

 

 

 

Anti-Tip Block

 

 

 

 

 

 

 

 

 

 

Against Rear

 

 

 

 

 

 

 

 

 

 

Cabinet Wall

9"

 

 

 

 

9" From Floor

 

 

 

 

 

 

 

 

 

 

to Bottom

 

 

 

 

 

 

 

 

 

 

of Block

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2x4 or 2x2

 

 

 

 

 

Runners or Solid

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Bottom

 

Pour éviter les blessures, il faut installer une patte de retenue pour empêcher le tiroir de basculer quand il est ouvert et plein.

Step 2

Install

Warming

Drawer

•Slide left corner of the drawer into the opening.

•Push power cord into the hole leading to the outlet location. Thread the cord through as drawer is being pushed back into the open- ing. Check to be sure power cord does not get trapped under the drawer.

–If the outlet is installed inside the opening, plug the cord into the outlet. Coil power cord and secure to warming drawer side with power cord clip.

•Push the drawer back until the front flange is flush to the cabinet front.

•Open the drawer fully.

•Drill pilot holes through the holes in the overlaping frame, one on each corner.

•Drive wood screws provided into each corner.

7

Page 6 Page 8
Page 7
Image 7
GE Monogram ZKD910, ZTD910 Provide Cabinet Support, Step Install Anti-Tip Brackets, Step Install Warming Drawer
Page 6 Page 8

ZKD910, ZTD910 specifications

The GE Monogram ZTD910 and ZKD910 are premium appliances designed to redefine cooking and kitchen experience for homeowners who value both performance and aesthetics. These models come equipped with advanced features and technologies, making them stand out in the competitive market of high-end kitchen appliances.

One of the key features of the GE Monogram ZTD910 and ZKD910 is their spacious capacity. With generous interiors, both models provide ample room for cooking, ensuring that food enthusiasts have the freedom to experiment with different dishes without worrying about space constraints. The spacious design is complemented by versatile cooking options, including multiple cooking modes such as convection, bake, and broil, which allow users to achieve optimal results for a variety of culinary techniques.

Another highlight of these appliances is their advanced temperature control technology. With precise temperature management, home chefs can maintain consistent heating, which is critical in achieving perfect baking results or slow-roasting meats. The integrated temperature probes are noteworthy as they allow users to monitor cooking progress without opening the oven door, ensuring heat is retained and results are flawless.

The design elements of the GE Monogram ZTD910 and ZKD910 are crafted with elegance in mind. Featuring a sleek stainless-steel finish, these appliances not only perform exceptionally but also add a modern touch to any kitchen decor. The interior is easy to clean and maintain, with smooth surfaces that prevent food residue from sticking, thereby enhancing overall user experience.

In terms of user interface, both models are equipped with intuitive controls and advanced display options that simplify the cooking process. Touch-sensitive controls enable seamless selection of cooking functions, while LED lighting enhances visibility within the oven cavity, making it easy to monitor dishes as they cook.

Safety features are also paramount in these models, with automatic shut-off mechanisms and child lock options designed to give users peace of mind. The self-cleaning function is particularly convenient, as it makes upkeep effortless, allowing homeowners to enjoy their appliances without the hassle of rigorous cleaning.

In conclusion, the GE Monogram ZTD910 and ZKD910 embody luxury, efficiency, and innovation in the kitchen. With their spacious capacity, advanced technologies, elegant design, and user-friendly features, these appliances are ideal for culinary enthusiasts seeking to elevate their cooking experience while enjoying the benefits of a high-performance kitchen appliance.
Top Page Image Contents