For your safety
Care and Cleaning
Custom Hood Insert
Before servicing or cleaning the unit, switch power off at the service panel and lock the service panel to prevent power from being switched on accidentally. If the service panel cannot be locked, fasten a tag or prominent warning label to the panel.
Metal grease filters
The metal filters trap grease released by foods
on the cooktop. The filters also help prevent flames (from food, grease) from damaging the inside of the hood.
For this reason, the filters must ALWAYS be in place when the hood is used. The grease filters should be cleaned every 6 months, or as needed.
To remove:
Support the filter with one hand while pulling down filter clip with the other Pull the filter down and out.
To replace:
1.Tip the filter into the back tab slots and lift up.
2.While maintaining slight upward pressure on filter, open clip and press into place with two hands.
To clean, swish the filter in hot soapy water and rinse in clean water or wash it in the dishwasher Do not use abrasive cleansers.
Clip
Clip 
7
