GE Monogram ZX2L SS Installation On 27 Cart, Secure Support Brackets to Grill

Installation

Dual Burner Outdoor Cooktop

Step2

Installation On 27" Cart

(Skip this step if

you are installing

in an enclosure)

The cooktop burner is designed to fit onto the right side of the 27" grill head.

•Open the grill lid and remove the right cooking grate and Gourmet Radiant Tray (or Lava Rock Tray).

Secure Support Brackets to Grill

•Remove the cooktop burner cover, burner grate and stainless steel aeration pan and drip tray.

•Remove the two open top burners by grasping the burner and pulling up and towards the rear.

•Secure the support brackets to the cart using two 1/4 - 20 x 1/2" bolts, 1/4" flat washers and lock nuts as shown. Use a 7/16" socket with extension to reach the front lock nut.

1/4-20

Lock Nut Support Bracket

	Gas Hose
1/4-20	Bushing
Lock Nut	1/4" Flat
	Washers

1/4-20x1/2" Bolts

Secure Cooktop to Grill Head

•Install two 10 - 24 x 3/4" screws and #10 washers from inside the grill head. On the outside of the grill head, install 1/4" round spacers onto the bolt.

•Position the cooktop chassis on top of the support brackets, aligning side mounting holes with bolts. Push bolt through the spacer and into the burner box. Secure with lock nuts.

•Check to be sure the cooktop is level with the grill head. Loosen mounting bolts and adjust if necessary.

10-24x3/4 Screws

Washer 1/4" Spacer

10-24 Lock Nut

Secure Cooktop to Support Brackets 10-24x3/8" Screws

• Install the four 10 - 24 x 3/8" screws through the inside of the burner box and through the bracket. Secure with 10-24 lock nuts.

• Reinstall the cooktop burner, aeration pan, burner grate and drip tray.

10-24 Lock Nuts

5