Geemarc 20 manual Setting Ringer Volume, Tone / Pulse Switch T/P, Setting Speaker Volume

SETTING UP

3 - SETTING RINGER VOLUME

You can set the desired ringer level by using the ringer Hi / Lo switch located on the base of the unit.

4 - TONE / PULSE SWITCH (T/P)

A switch T/P located under the base allows to set the dialling mode.

The Tone/Pulse switch is factory pre-set to Tone position. In the UK, all telephone exchanges now use Tone dialing. If your phone does not dial out it is probably being used from an older private switch board (PBX). In this case, the Tone/Pulse switch must be moved to Pulse.

5 - SETTING SPEAKER VOLUME

You can set the desired speaker volume level by using the ringer Hi / Lo switch located on the base of the unit.

For product support and help visit our website at

www.geemarc.com

telephone 01707 384438

or fax 01707 372529

8