SETTING UP
-Telephone Number Display : displays the telephone number (upto 10 digits) as the digits are being dialed from the telephone keypad, or from memory. If the telephone number is more than 10 digits, only the last 10 digits are displayed.
0 1 2 3 4 5 6 7 8 9
2 - SETTING TIME
-Lift the handset.
-Press the 
key, time display will appear and hour digit will flashes
-Press the * key to select the desired number.
-Press the # key to confirm and enter into the minute setting.
-Press the * key to select the desired number.
-Press the # key to select the desired number.
-Replace the handset on the cradle.
-The display will show time and will start counting up after few seconds.
For example as below :
16-45-30
Note: This is also the default display format when the unit is in the idle state (On hook).
7
