Geemarc 4 CID manual Contrast Adjustment

SETTING UP SOLAR4 CID

4 - AREA AND LONG DISTANCE CODE SETTING (Only under “ENGLISH 1” language)

In order to use your call records to dial, the telephone need to distinguish between local and long distance calls. You need to program your area code.

In the state of OFF-HOOK, do as the following steps:

-Press and hold button.

-Press button. LCD will displays “SET AREA CODE”. The unit enters the area code & LDS code.

-Press or button to select the correct number.

-Press OK button to set the next digit.

-When the area code setting has been completed, press OK button, LCD diplays “SET LDS CODE”. The unit enters long distance code setting.

-Press or button to select the correct number.

-Press OK button to set the next digit.

-Press button to exit the setting.

Note : If you don’t need to set area code, just set it as “- - - -” by pressing OK button. Press button after entering “SET LDS CODE” to ignore the long distance code setting.

5 - CONTRAST ADJUSTMENT

In the state of OFF-HOOK, do as following steps:

-Press and hold OK button then .

-Press or button to adjust the contrast.

-Press OK button to comfirm and exit.

6