taken by all users that the handset earpiece volume switch is set to the lowest level acceptable by each respective user. Care should therefore be exercised to ensure that any naive users are familiar with this requirement.
The handset earpiece volume can be adjusted by moving the Volume switch, located above the handset microphone, to High, Medium or Normal.
H M N
5 - USING THE TELEPHONE
Having connected the telephone to the telephone socket, lift the handset, await dial tone, and dial required number. On completion of the call, carefully replace handset in cradle.
6 - MEMORY OPERATION
Your telephone can store up to 3 'One touch', and 10 'Two touch' telephone numbers. Each telephone number must be stored in a specific memory location and can be up to 21 digits long. If you wish to store a number having more than 21 digits (as may be required, for example, by international numbers preceded by a 3 or 4 digit national operator access code), it is suggested that the 3 or 4 digit access code is stored in a 'One touch' location and the international number stored in any other location.
Note : Numbers stored in the memory may be lost if the telephone is disconnected from the telephone line.
7 - STORING TELEPHONE NUMBERS a) 'One touch' locations
1.Ensure telephone is plugged into telephone socket and lift handset.
2.Press 
button.
3.Press one of the 'One touch' direct memory buttons, M1, M2 or M3.
4.Dial the telephone number you wish to store.
5.Press the 
button again.
6.Repeat steps 2 to 5 for the remaining two 'One touch' locations.
7.Replace handset.
b) 'Two touch' locations
1.Ensure that telephone is plugged into telephone socket and lift handset.
2.Press 
button.
3.Press MEM button.
4.Press any button 0 to 9 on the keypad under which you wish to store the telephone number.
5.Dial the telephone number you wish to store.
6.Press the 
button again.
7.Repeat steps 2 to 6 for any other numbers you wish to store allocating a different keypad number for each and then replace the handset.
8 - DIALLING STORED TELEPHONE NUMBERS
a)'One touch' locations - Lift handset, await dial tone and press appropriate direct memory button M1, M2 or M3. The stored number will be dialled out automatically.
4
