Using Your Projector 15
Using the Control Panel
1Power Turn the projector on and off. For more
information, see "Turning Your Projector On" on
page11 and "Turning Your Projector Off" on
page11.
2Source Press to toggle through Analog RGB, Composite,
Component-i, S-video, and Analog YPbPr sources
when multiple sources are connected to the
projector.
3Keystone adjustment Press to adjust image distortion caused by tilting
the projector. (±16 degrees)
4Resync Press to synchronize the projector to the input
source. Resync does not operate if the on-screen
display (OSD) is displayed.
5Menu Press to activate the OSD. Use the directional
keys and Menu button to navigate through the
OSD.