HOR. POSITIONPress

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

Computer Source Menu

NOTE: This menu is only available connected to a computer.

FREQUENCYChange the display data clock frequency to match the frequency of your computer graphics card. If you see a vertical flickering bar, use Frequency control to minimize the bars. This is a coarse adjustment.

TRACKINGSynchronize the phase of the display signal with the graphic card. If you experience an unstable or flickering image, use the Tracking to correct it. This is a fine adjustment.

NOTE: Adjust the Frequency first and then the Tracking.

to adjust the horizontal position of the image to the left and to adjust the horizontal position of the image to the right.

VER. POSITIONPressto adjust the vertical position of the image down and to adjust the vertical position of the image up.

Video Source Menu

NOTE: This menu is only available with S-video, Video (composite) signal connected.

SATURATIONAdjust a video source from black and white to fully saturated color. Press to decrease the amount of color in the image and to increase the amount of color in the

image.

SHARPNESS—Press

 

 

to decrease the

 

 

sharpness and

 

 

 

increase the sharpness.

 

to

 

 

TINTPressto increase the amount of green in the image and to increase the amount of red in the image.

22

Using Your Projector

Page 22
Image 22
Dell 3400MP owner manual Computer Source Menu, Video Source Menu, Increase the sharpness