www.dell.com | support.dell.com
16 Using Your Projector
Using the Remote Control
6TEMP warning light
• If the TEMP light is solid orange, the projector
has overheated. The display automatically shuts
down. Turn the display on again after the
projector cools down. If the problem persists,
contact Dell.
• If the TEMP light is blinking orange, a projector
fan has failed and the projector automatically
shuts down. If the problem persists, contact
Dell.
7LAMP warning light If the LAMP light is solid orange, replace the
lamp.
8Enter Press to confirm the selection item.
9Keystone adjustment Press to adjust image distortion caused by tilting
the projector. (±16 degrees)
10 Up and Down Press to select the OSD items.
11 and buttons Press to adjust the OSD setting.