www.dell.com | support.dell.com
20 Using Your Projector
Audio Menu
VOLUME—Press
to decrease the volume
and to increase the volume.
MUTE—Allow to mute the volume.
Management Menu
MENU LOCATION—Select the location of the
OSD on the screen.
PROJECTION MODE—Select how the image
appears:
• Front Projection-Desktop (the default).
• Rear Projection-Desktop — The
projector reverses the image so you can project
from behind a translucent screen.
SIGNAL TYPE—Manually select signal type RGB,
YCbCr, YPbPr.
LAMP HOUR—Display the operating hours since
the lamp timer reset.
LAMP RESET—After you install a new lamp,
select Yes to reset the lamp timer.
POWER SAVING—Select Yes to set the power saving delay period. The delay period is
the amount of time you want the projector to wait without signal input. After that
set time, the projector enters power saving mode and turns off the lamp. The
projector turns back on when it detects an input signal or you press the power
button. After two hours, the projector turns off and you need to press the power
button to turn the projector on.
AUTO SOURCE—
Select
On
(the default) to autodetect the available input
signals. When the projector is on and you press
SOURCE
, it automatically
finds the next available input signal. Select
Off
to lock the current input
signal. When
Off
is selected and you press
SOURCE
, you select which
input signal you want to use.