Geemarc CLA-40 VOX Installation, How To Set The Battery, HOW TO CONNECT THE CLA-40VOXTO THE PHONE

INSTALLATION

1 - HOW TO SET THE BATTERY

The CLA-40VOX amplifier needs with a 9V PP3 battery (not provided). To insert the battery into the amplifier:

-Open the battery compartment located on the base by pressing the small plastic lock.

-Insert the 9V battery with the correct polarity into the connector in the battery compartment.

-Replace the battery cover.

-The amplifier is now ready to be connected to the phone.

2 - HOW TO CONNECT THE CLA-40VOX TO THE PHONE

To connect your phone to the CLA-40VOX amplifier:

-Unplug the handset from your telephone base socket.

-Connect the small lead supplied with the CLA-40VOX to the telephone base socket and to the inputsocket (1) located at the top of yourCLA-40VOX .

-Connect your handset curly cord to the output socket (2) located at the front of your CLA-40VOX.

VOICE CONTROL : As soon as the CLA-40VOX will detect a voice, a sound from the earpiece or the microphone, it will turn ON automatically ( LED lit) then during a silence more than 15secs it will also turn OFF automatically.

IMPORTANT: The CLA-40VOX cannot be used with one-piece telephones which have a keypad on the handset.

8