DIP SWITCH GUIDELINES
Underneath the 4x4 DVI Matrix are two banks of Dip Switches. Below is a table describing their functions. By default, the Bank of 8 switches are set of to the Off position and the other bank of 4 switches are set to ON. The bank of 4 dip switches are service switches and should not be changed from their ON position.
Dip Switch# | Name | Description |
1 | IR Code Dip Switch | Corresponds to Dip Switch 1 on |
2 | IR Code Dip Switch | Corresponds to Dip Switch 2 on |
3 | Unused | Unused |
4 | Unused | Unused |
5 | Unused | Unused |
|
|
|
6 | Unused | Unused |
7 | Unused | Unused |
8 | Unused | Unused |
Remove Tape
Front
Bottom
8 |
|
7 |
|
6 |
|
5 |
|
4 |
|
3 |
|
1 2 | IR Switches |
4 |
|
3 |
|
2 |
|
7 |
|
