Gefen EXT-3GSDI-441 user manual CONNECTING AND OPERATING THE 4X1 3GSDI SWITCHER

CONNECTING AND OPERATING THE 4X1 3GSDI SWITCHER

How to Connect the 4x1 3GSDI Switcher

1.Connect up to four 3G-SDI, HD-SDI or SDI source devices to the 4x1 3GSDI Switcher’s inputs using user supplied cables.

2.Connect a single 3G-SDI, HD-SDI or SDI capable device to the 4x1 3GSDI Switcher’s outputs using a user supplied cable.

3.Connect the included 5V DC power supply between the 4x1 3GSDI Switcher’s power receptacle and an open wall power socket.

4.Initialize (power on) the output device first and the source devices second.

How to Operate the 4x1 3GSDI Switcher

The source input is selectable by using either the included RMT-4IR remote control or the integrated RS-232 serial communication port. The LED indicators on the front panel indicate the currently selected input. If the selected input has no source connected, the LED will be red. If the selected input is connected to a source, the LED will be green.

Please see page 7 for IR Remote Control Unit operation.

Please see page 10 for RS-232 serial communication control operations.

Wiring Diagram for the 4x1 3GSDI Switcher

3G-SDI Source

3G-SDI Source

3G-SDI Source

3G-SDI CABLE

Switcher

3G-SDI Source

3G-SDI Display

EXT-3GSDI-441

6