UNIT PANEL DESCRIPTIONS
1IR Receiver
This receivers will accept commands from the included
2Power Indicator LED
This LED indicator will become active once the included 5V DC power adapter has bee properly connected between the sender unit and an open wall power socket.
3Selected Input LED
Each input source has an LED that will become active when it is selected. All input sources are listed below.
CV | Composite input |
SV | |
Comp | Component input |
HDMI 1 | HDMI 1 input |
HDMI 2 | HDMI 2 input |
DVI | DVI input |
4RS-232 Serial Communications Port
This port can accept commands from an
5Analog Stereo Input Port for Composite
This input will accept audio from one pair of RCA analog stereo cables for use with the composite input.
6Composite Input Port
This input will accept video from one RCA composite source. The composite source will be digitally converted for output through the HDMI Output Port.
7Analog Stereo Input Port for Component
This input will accept audio from one pair of RCA analog stereo cables for use with the component input.
824V Power Supply Input Port
Connect the included 24V DC power supply to this input. Once properly connected between the unit and an open wall power socket, the Power Indicator LED should become active.
9Stereo Speaker Terminals
The stereo speaker output terminals use
5