![](/images/new-backgrounds/1299829/29982923x1.webp)
OPERATING THE
DIGITAL SIGNAGE PLAYER WITH WI-FI
Powering the Digital Signage Player
After connecting power to the unit, the following screen will be displayed:
The boot process will take approximately 90 seconds. Once the boot process has successfully completed, the Digital Signage Player will be ready to sync content using the USB port. If content has already been loaded, then playback will begin immediately. If no content has been loaded or if the unit has been reset, then the Welcome screen will be displayed.
NOTE: The current IP address of the Digital Signage Player is displayed in the lower
IP address of Digital
Signage Player
9