Gefen EXT-HD-DSWF manual Front Panel Descriptions, LED Indicators

FRONT PANEL DESCRIPTIONS

Front Panel

1AV Out

Connect the included 3.5 mm mini-stereo to RCA cable to this output connector.

2Reset

Press this button while performing a system reset. See page 51 for details.

3LED Indicators

The Green LED indicates that the unit is powered. The Yellow LED indicates data flow but is primarily used when performing a factory reset on the Digital Signage Player (see page 51 for details).

4Ethernet

Connect an Ethernet cable between the port and the network router or switch.

5USB Ports

Connect a USB keyboard and flash drive to these ports to configure the Digital Signage Media Player with Wi-Fi.

6CF (Compact Flash) Slot

Remove the cover and insert a flash card to replace the 4 GB of internal storage. The Digital Signage Player supports up to 16 GB of storage space.

7Wi-Fi Antenna

The included Wi-Fi antenna must be connected to the Digital Signage Player in order for the device to work properly. Make sure the Wi-Fi antenna is connected before the unit is powered.

5