Gefen GTV-HDMI-CAT5LR Receiver Unit Panel Descriptions, 1HDMI Output, 3Equalization Trim Pot

RECEIVER UNIT PANEL DESCRIPTIONS

1HDMI Output

Connect the HDMI capable device to this output port.

2Distance Control Dip Switches

These 2 Dip Switches are used to adjust the video/audio signal for specific CAT-5 cable lengths. Please use the table on page 9 for more information on this setting.

3Equalization Trim Pot

This Trim Pot is used to adjust the amount of equalization that is applied to the incoming signal. This setting must be adjusted to receive the best possible quality.

4Gain Trim Pot

This Trim Pot is used to adjust the amount of gain that is applied to the incoming signal. This setting is meant to adjust the brightness of the incoming video signal.

5RJ-45 Port (Video)

This port accepts an CAT-5, CAT-5e or CAT-6 cable for receiving of the video and audio signals from the sender.

6RJ-45 Port (DDC)

This port accepts an CAT-5, CAT-5e or CAT-6 cable for connection to the sender. This cable will be used for DDC and HDCP data.

75V DC Power Input

Connect the included 5V DC power supply between this input and an open wall power socket.

8Power LED indicator

The LED will become active once the included 5V DC power supply has been properly connected.

7