![](/images/new-backgrounds/1125103/12510321x1.webp)
EDID MANAGEMENT
Continued from the previous page
NOTE: All other HDMI capable devices/displays connected to the output ports MUST be compatible with at least one resolution/audio format specified in this EDID. It is recommended to set, on the source device, a common resolution and audio format shared by all attached devices/displays. This is to ensure a compatible signal is output to all connected devices/displays.
This mode should be used in most scenarios.
Audio Channel Selection
The Mini 1:8 Splitter for HDMI 1.3 features a switch that will modify the supported audio formats listed in the
NOTE: This selector switch will only affect the
The Mini 1:8 Splitter for HDMI 1.3 can use either of the following settings for audio format support:
1.2 Channel: This setting will limit the audio formats listed in the pre- programmed EDID to 2 channel LPCM. For a full listing of the audio formats in this mode please see page 9.
This mode is useful in scenarios where all output devices/displays are HDTV monitors that only support 2 channel LPCM. This setting will ensure that all connected devices will receive and produce sound.
2.
This mode is useful in scenarios where the output devices/displays are varying devices (i.e. HDTV display and audio receivers). Please note that sound may not be heard from all output devices/displays if a shared common audio format is not used by the source device.
8