RACK MOUNT / TABLETOP INSTALLATION
Rack mount ears are provided for installation of this unit into an equipment rack. Please refer to Figure 1 below. When using the product in a tabletop configuration, please install the provided rubber feet as shown in Figure 2.
*3PCS
1.Locate the side screws on the unit.
2.Remove the front 3 screws that are located closest to the front of the unit.
3.Using the removed screws, screw the rack mounting bracket into the unit.
4.Repeat the procedure on the opposite side of the unit.
B | A |
B | A |
| A |
| B |
Figure 2. Desktop Installation
1.Turn the unit upside down.
2.Affix rubber feet to the unit, making sure you match up the correct shapes as shown in the diagram above.
48