Troubleshooting, Specifications, Cue Points, Seamless Loop

By selecting a SAMPLE (18) button that already has stored informa- tion, you will instantly erase that information and rerecord over top of this information.

CUE POINTS:

To use the CUE POINTS (16), you must first program the entry point. Press the MEMO (15) button first to begin storing your CUE POINTS (16). The MEMO(15) LED will illuminate to indicate that the unit is ready for cue storage. Select a location to store your CUE POINT (16) by choosing one of the 5 CUE POINTS (16) buttons.

When the track reaches the point at which you would like your cue to begin, press the CUE POINT (16) button. The CUE POINT (16) LED will blink when the selection has been stored. Press the CUE POINT (16) button to start from that cue point at any moment during play and the unit will automatically begin playing from that point. The CUE POINT

(16)LED will continue blinking during play to indicate that it is in use. When the CUE POINT (16) is no longer in use, the CUE POINT (16) LED will remain on to indicate that this cue point is still stored in that location.

To rerecord a CUE POINT (16), repeat these instructions. By selecting a CUE POINT (16) that already has stored information, you will instant- ly erase that information and rerecord over top of this information.

CUE:

To use CUE (7) you must first find the point where you would like to begin play. Place the track in PAUSE mode. This will activate the stutter mode. Then use the JOG WHEEL (23) for fast, precise searching. SEE JOG WHEEL (23) for more info.

Once you have found the point at which you would like to begin play- ing, do not further adjust the JOG WHEEL (23). Then press PLAY/PAUSE (8) rapidly. Then CUE (7) LED will blink. Your CUE is now stored into the unit's memory.

Press CUE (7) to scan to the CUE point. This will pause the CD at the point of cue. Press and hold the CUE (7) button to begin CUE preview, which will allow you to judge whether the point of cue you have loaded is satisfactory.

If you are not satisfied with your point of cue, press PAUSE (8) and use the JOG WHEEL (23) to find the exact point you wish to begin play. Rapidly press PLAY (8) twice to enter and exit play mode. You will be in pause mode. The CUE (7) LED will blink. Repeat the steps for CUE preview, to make sure your new cue point is satisfactory.

When you are satisfied with your point of cue, leave the CUE (7) but- ton alone, the CUE (7) LED will remain on to indicate that the point of cue is stored and ready to be used. Press HOT START (17) for instant play at your point of cue.

SEAMLESS LOOP:

Press the LOOP IN (40) button to enter an entry point into the memo- ry, and the LOOP IN's (40) green LED will blink rapidly while memoriz- ing loop entry and exit points.

After an entry loop point is memorized, press LOOP OUT (41) in play mode to complete the loop. The unit will automatically repeat the sec- tion between the loop's entry point, programmed with the pressing of the LOOP IN (40) button, and a second exit loop point, when the LOOP OUT (41) button is pressed. The loop is now programmed into the unit's memory.

While playing the loop, both the LOOP IN (40) and LOOP OUT (41) green LEDs will blink to indicate that the loop is in use. You will notice the LCD (12) will also indicate that the LOOP is in use with a blinking A1 icon that will remain steady once the loop has been stopped.

Press the RELOOP (42) for the unit to return to the previously set loop. Press the RELOOP (42) repeatedly for stuttering the loop entry point. The RELOOP (42) function automatically returns the music to the loop point and will play the loop until it is released with the LOOP OUT (41) button.

Press the B-EDIT(43) button to edit the loop created by your SEAM- LESS LOOP. This feature allows you to adjust the exit point saved in your LOOP OUT(41) setting.

To exit the loop and resume play, press LOOP OUT (41) to stop the loop and continue play from the point where the loop ends.

START:

Turn the START (30) rotary control clockwise for a long, slow start. Turn the START (30) rotary control counter clockwise for a short, fast start. Make sure you activated the BRAKE (38) DSP button. The

BRAKE (38) LED will be illuminated when it has been activated. Then from pause mode, press PLAY (8) to enter into play mode. You may adjust this feature to the precise effect you wish by adjusting the START

(30)rotary control. The effect's parameter will be displayed at the bot- tom of the LCD (12) listed BK START.

BRAKE:

Turn the BRAKE (31) rotary control clockwise for a long, slow stop. Turn the BRAKE (31) rotary control counter clockwise for a short, fast stop. Make sure you activated the BRAKE (38) DSP button. The BRAKE (38) LED will be illuminated when it has been activated. Then from play mode, press PAUSE (8) to enter into pause mode. You may adjust this feature to the precise effect you wish by adjusting the BRAKE (31) rotary control. The effect's parameter will be displayed at the bottom of the LCD (12) listed BK STOP.

PROGRAM:

The CFX-30has the capability to program a set list from the CD. This will allow you to play selected tracks from the CD in the order you choose. To program a set list, load the CD in to the DISC IN SLOT (10). After the unit reads the CD, play should be stopped. Then press the PGM button in the DIRECT SELECT (14) section of your unit to begin programming your set list.

Select the first track with which you would like to start the set list with the DIRECT SELECT (14) buttons or the TRACK SKIP (13) rotary con- trol. Once you have selected a track, press SET in the DIRECT SELECT

(14)section of your unit to store this track into your program list. Repeat these steps until you have completed your set list.

If you would like to change a track in your set list, press PGM repeat- edly until you have reached the track you wish to change. Use the DIRECT SELECT (14) buttons or the FOLDER/TRACK SKIP (13) rotary control to enter the track you wish to save to the set list. Then press SET and you will have stored the track into the set list. Press PLAY (8) to begin the set, and your set list will be completed.

You may scroll through this list, after pressing PLAY (8), with the FOLDER/TRACK SKIP (13) rotary control to make sure that the set is in the order that you wish.