Keypad Controls and Indicators
Fire Alarm Light will flash and the Keypad
sounder will beep when system is in a Fire Alarm Condition (See Silencing a fire Alarm, Page 8)
Zone Lights (1 through 8) will light to indicate | AC Light will light to indicate |
that the corresponding Zone is open, and will | that AC Power is present. |
flash to indicate a zone in alarm. |
|
Trouble Light will light and the Keypad
sounder will pulse to indicate that a system trou- ble is present. (See System troubles, Page 12)
Status Light will light when all zones are secure and system is ready to be Armed.
Armed Light will light when system is Armed, and will flash when system is in Alarm
Press followed by the corresponding
Function number to enable special functions and options. (See Special Functions, Page 11)
To Bypass a zone, press and the zone
number to be bypassed, and then Arm system.
Press to reset Fire Zone, clear miss-
entered codes, reset Alarm Memory, etc.
4
G E M I N I
1 2 3 4 5 67 8
Numerical | Emergency Keys Press simultaneously | |
Keys | to signal an emergency condition. | |
Used to en- | Press | +for Fire Emergency, |
ter User | ||
Codes, Zone | + | for Auxiliary Emergency or |
numbers, | +for Police Emergency. | |
etc. | (Programmable) |
Press
to bypass all interior pro- tective de- vices such as motion sensors, etc.
Press
after entering User Code when Arming or Disarming System.
Press
to remove entry delay from the Exit/ Entry door.
Oi219c | Tuesday, September 16, 1997 08:24 |
page 4 |
|