Gemini manual MS-USB Setup Guide EN, Diagram and System Functions

MS-USB SETUP GUIDE - EN

DIAGRAM AND SYSTEM FUNCTIONS (cont.)

21 22 23 24

21.MICROPHONE 1 BALANCED INPUT WITH GAIN CONTROL (1/4” & XLR): This jack can either take a ¼” balanced or a XLR balanced cable.

22.INSTRUMENT/MICROPHONE 2 INPUT WITH GAIN CONTROL (1/4”): This mono input accepts a ¼” input such as a microphone, guitar, or other musical instrument.

23.USB/SD/AUX INPUT WITH GAIN CONTROL (STEREO RCA): This knob controls the level of the USB/SD and the RCA input. This stereo RCA input can be used to connect a CD, MP3, or other audio source. To connect to a portable device with a 1/8” headphone jack, you need a standard (1/8” to RCA) adapter which is NOT included.

24.MASTER VOLUME CONTROL: This knob controls the master volume of the MS-USB.

25 26 27 28 29 30

25.POWER CONNECTOR-Insert the included power cable here to charge the unit. Note that the MS-USB can run off the power adapter while it simultaneously charges the battery. The charge indicator illuminates when the battery is charg- ing.

26.POWER ON/OFF: Powers the unit ON/OFF.

27.VOLTAGE SELECTOR: Set this to the correct voltage for your location standard.

28.USB/SD TOGGLE SWITCH: Enables or disables the top USB/SD player module.

29.BATTERY LEVEL INDICATOR: While the unit is powered ON, these four lights indicate the power left in the battery. Battery life var- ies based on volume and usage.

30.LINK OUTPUT: This ¼” jack is a stereo line level output that can be connected to the stereo input of an amplifier or amplified loud- speaker such as another MS-USB.

6	Diagram and System Functions
	Diagrama y Funciones del Sistema Schéma & Détail des Fonctions Bedienfeld