INTRODUCTION:
FEATURES:
FACE:
- Removable face plate for user replaceable cross fader
- 2 band rotary line EQ with cut feature & rotary gain channel control - Rotary cue Master volume control Mic Volume Control
FRONT:
- ¼" headphone output
PRECAUTIONS: |
| |
1. | All instructions should be read before using this equipment. | |
2. | To reduce t he risk of electrical shock, d o not open the unit. | |
Please refer all servicing ne eds to a | ||
technician. |
| |
3. | D o not expose this unit to dir ect su nlight o r a h eat so urce | |
such as a radiator or stove. |
| |
4. | This unit should be cleaned only with a damp cloth. Avoid sol- | |
vents or other cleaning detergents. |
| |
5. | When moving this e quipment it should be placed in its or igi- | |
nal carton and packaging. This will re duce the risk of damag e | ||
during transit. |
| |
6. | DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. | |
7. | DO NOT U SE SPRAY CLEANERS OR LUBRICANT S ON | |
CONTROLS, SURFACES OR SWITCHES. | 1. | |
| IN THE USA ~ IF YOU EXPERIENCE PROBLEMS WITH THIS UNIT | |
| CALL GEMINI CUSTOMER SERVICE AT: 1 (732) |
|
| ATTEMPT TO RETURN THIS EQUIPMENT TO YOUR DEALER. |
|
CONNECTIONS:
1. The
2. H eadphones ma y be plu gged into the front
3. Microphones may b e plu gged into the r ear pane
4. The
| ||||
The RCA input(s) o n yo ur lef t a re fo r PH 2/Li ne 2 | Plug the | |||
RCA's from your playable medium into each input to be connect- | ||||
ed to their respective CHANNELS (CH). The PH INPUTS | (7) | |||
only accept turntables with a magnetic cartridge. The STEREO | ||||
LN INPUTS (7) only accept line level inputs such as a CD, | DAT, | |||
Mini Disc, etc and require the proper switch setting. |
| RCA | ||
5. When using (a) turntable(s), you will need to ground the | ||||
cable(s) by screwing in the grounding fork(s) to th e | GROUND- | |||
ING SCREW (4) located in the rear panel of the | ||||
Attach each PH ground line to the GROUND THUMB SCREW | ||||
(4). This is located | directly a bove the REAR PANEL MICRO- | |||
PHONE JACK (3). |
|
| MAY | |
NOTE: WHEN USING TURNTABLES, NOT ATTACH ING A GROUND | ||||
CAUSE A SYSTEM "HUM." |
|
| ear | |
1. Once all of your | con nections have b een ma de in the r | |||
panel, turn on the mixer by plugging in the Power Cord (1). |
| |||
2. CH 1: To bring this channel into program output (PGM), you | ||||
must first decide which line will be in use. Use th e LN SWITCH | ||||
(6) to toggle from | PH 1 to LN 1 on this channel. Once you've | |||
selected the prope r line , slowly raise the CH 1 SLIDE CON - | ||||
TROL (15) to a c omfortable leve l. You can further mod ify the | ||||
sound output of this channel by adjustin g the rotary GAIN | (8), | |||
HIGH (9) and LOW (10) controls located above the CH 1 SLIDE | ||||
CONTROL (15). |
|
|
|
|
3. CH 2: To bring this channel into program output (PGM), you | ||||
must first decide which line will be in use. Use th e LN SWITCH | ||||
(6) to toggle from | PH 2 to LN 2 on this channel. Once you've | |||
selected the prope r line , slowly raise the CH 2 SLIDE CON - | ||||
TROL (15) to a c omfortable leve l. You can further mod ify the | ||||
sound output of this channel by adjustin g the rotary GAIN | (8), | |||
HIGH (9) and LOW (10) controls located above the CH 2 SLIDE | ||||
CONTROL (15).. |
|
| W ITH | |
NOTE: FOR O PTIMAL PERFORMAN CE, BEGIN PR OGRAM MIX | ||||
ROTARY GAIN (8) CONTROLS SET TO MINIMUM (ROTA TE IT COUNTER - | ||||
CLOCKWISE T O THE COUNTER CL OCKWISE POSITION). MAKE ALL | ||||
ADJUSTMENTS IN SOU ND OUTPUT WITH THE USE OF YOUR | CHANNEL | |||
SLIDE CONTROLS AND MASTER (11) VOLUME ROTARY CONTROLS. THIS WILL PREVENT SIGNAL OVERLOAD AND DECREASE DISTORTION. ONCE YOU HAVE MODIFIEDYOUR SOUND AND WOULD LIKE TO NCREASEI THE OUTPUT OF YOUR SOUND, THEN YOU MAY ADJUST THE ROTARY GAIN CONTROL IF NEEDED.
4. CUE: By conne cting a se t of headphon es to t he HEAD- PHONE (5) jack, you can monitor any or all channels.
