IN THE USA ~ IF YOU EXPERIENCE PROBLEMS WITH THIS UNIT CALL GEMINI CUSTOMER SERVICE AT:
1 (732) 346-0061. DO NOT ATTEMPT TO RETURN THISE EQUIPMENT TO YOUR DEALER.
Congratulations on purchasing the Gemini CDMP-2600 CD Player.
This state of the art Professional CD Player is backed by a 1 year
warranty*. Prior to use, we suggest that you carefully read all the instructions.
- Audio CD & CD-R compatible
- Extra Large jog wheel
- Anti-shock using RAM buffer memory
- 2 Selectable Jog modes Pitch Bend/Search
- Instant-start & cue with preview
- Single & continuous play modes
- Seamless loop with reloop
- Pitch bend via jog wheel or buttons +/- 24%
- Three mode time selection
- Frame accurate search
- Large blue backlit LCD display
- Variable pitch control with three settings +/- 8,16 & 24%
Laser Diode Properties
Material: Ga - Al - As
Wavelength: 755 - 815 nm (25° C)
Laser Output: Continuous Wave, max. 0.5 mW
1. Do not use this CD player at temperatures below 41°F/5°Cor
higher than 95°F/35°C.
2. The apparatus should not be exposed to dripping or splashing,
and no objects filled with liquids such as vases should be
placed on the apparatus.
3. Place the unit in a clean and dry location.
4. Do not place the unit in an unstable location.
5. When disconnecting the power cord from the AC outlet,
always grasp it by the plug. Never pull the power cord.
6. To prevent electric shock, do not remove the cover or the bottom screws.
7. There are NO USER SERVICEABLE PARTS INSIDE. Please
refer to a qualified technician.
8. Do not use chemical solvents to clean the unit.
9. Keep the laser pickup clean by keeping the tray closed.
10. Keep this manual in a safe place for future reference.
INTRODUCTION:CDMP-2600
4
FEATURES:SAFETY SPECIFICATIONS:PRECAUTIONS:CONNECTIONS:1MAIN POWER RECEPTACLE: This is a Standard 3-prong IEC power
connector. Connect the detachable linecord (included in the box with
your CDMP-2600) to the power receptacle, and plug the other end of
the linecord into an ACoutlet.
The CDMP-2600has a universal power supply that can accept any AC
voltage from 100 VAC to 240 VAC.No need for voltage select
switches. It will work virtually anywhere in the world. It is less suscept-
able to voltage sags or spikes than conventional power supplies, pro-
viding greater electro magnetic isolation and better protection against
ACline noise
2LINE OUTPUT JACKSPlug one end of the included RCA cable into
LINE OUTPUT JACKSon the rear panel. Plug the other end of the
RCAconnectors into any available line input jacks on your mixer.
If you are connecting the CDMP-2600through a reciever, you can
plug the RCAconnectors into the CD or AUX INPUT JACKS on your
reciever. If there are no CDor AUX INPUTS use any line level
(not phono) inputs.
CONTROL CABLESPlug the CONTROL CABLES to each side of the
CDMP-2600be careful when plugging in these cables, never force
the cable into its socket, making sure that theDIN connector at the
end of the cable properly aligns with the drawing on the back of
the CDMP-2600.
3
4
FUNCTIONS:POWER: Once you have connected all your cables and made sure
that the VOLTAGE SELECTION SWITCHis set correctly, you can turn
the CDMP-2600on by pressing the POWER button, pressing the
CDMP-2600’sPOWER button a second time will turn off the unit.
DISC TRAY:The DISC TRAY is where the CDis held during loading,
unloading and playback, and holds both 12 cm and 8cm CD’s.(DO
NOT FORCE THE CD TRAY TO CLOSE EXCESSIVE FORCE WILL DAMAGE
THE CD MECHANISM, USE THE OPEN AND CLOSE BUTTONS)
EJECT BUTTON: Pressing the EJECT BUTTON will open or close the
DISC TRAY,unless the CDMP-2600 is in play mode, then you must
first stop the side you which to eject.
NOTE: To eject a CD you must be in CD mode, simply press the
USB/CD button and then press EJECT.
JOG WHEEL :In SEARCH MODE the JOG WHEELcan be used to
search forward or backwards in the music track, as well as for fine
adjustments to a CUEpoint in PAUSE mode. In PITCH BEND mode the
JOG WHEEL will function the same as thePITCH BEND allowing you
to speed up (FORWARD) or slow down (REWIND) the music clockwise
being (FORWARD) and counter clockwise being (REWIND).
JOG MODE BUTTON:When the JOG MODE BUTTON is illuminated
it indicates the the JOG WHEELis in SEARCH MODE, and when not il-
luminated it indicates that the JOG WHEELis in PITCH BEND MODE.
DISPLAY:The DISPLAY shows the track number, pitch value, pitch
bend, single, continue (for continuous play), play/pause modes, fast
forward/reverse modes, loop mode, reloop mode,PGM, repeat
modes, the playback display bar, and three different time displays.
These times displays are TIME ELAPSEDon the track, TIME REMAIN-
INGon the disc and and TIME REMAINING on the track. Time is
measured in minutes, seconds and frames.
TIME: The TIME BUTTONswitches the time display between three
available sources, these three are TIME ELAPSEDon the track, TIME
REMAININGon the disc and and TIME REMAINING on the track.
TIME ELAPSEDindicates how much time has currently gone by since
the play button was pressed, TIME REMAININGON DISC will count
down the time remaining on the entire disc and TIME REMAINING
ON TRACK counts down the time that is left before the end of the
track.
SINGLE: Pressing the SINGLEbutton engages SINGLE mode, in this
mode the CDMP-2600will play one song and then stop. Pressing the
SINGLEbutton again will then activate CONTINUOUS mode causing
the unit to play continuously (after the last track, the unit will return to
the first track of the disc and continue to play).
5
6
7
8
9
10
11