General Information
Remove all packaging material.
Remove separate accessory box.
Remove carton off the generator.
Check all contents (Figure 1). If any parts are missing or damaged locate an authorized dealer at
Contents include: |
|
| |
2 – Axle Pins | | Oil Filter | |
2 – Wheel Spacers | | Air Filter | |
2 – Hair Pins | | Spark Plug | |
2 – Wheels | | Spark Plug Wrench | |
1 | – Frame Foot | | Shop Towel |
2 | – Frame Bolts | 2 – Frame Washers | |
2 | – Vibration Mounts | | Oil Funnel |
4 | – Flange Nuts | 12 Volt Adaptor Plug Charger | |
2 – 1 Quart SAE 30 Oil Bottles
Figure 1 Accessory Boxes
Refer to Figure 2 and install the wheel kit and frame foot as follows:
Slide the Axle Pin through the Wheel, Wheel Spacer (Washer) and the Frame.
Install the Hair Pin to the Axle Pin to secure the wheel. Repeat for the opposite side.
Secure the Vibration Mounts to the Frame Foot with the included locking nuts.
To install the Frame Foot, install the Frame Bolts though the Frame Washers, Frame and Frame foot. Secure with the locking nuts.
Figure 2 Wheel and Foot Assembly
%77)1&0)
*6%1)
*338
7)'96);,))0
*6%1) |
| ;,))074%')6 |
*6%1) | ;%7,)6 | |
;%7,)6 | &308 |
|
Read entire Owner's Manual before attempting to assemble or operate the generator. The generator requires some assembly prior to using it. If problems arise when assembling the generator, please call the Generator Helpline at
*0%2+)
298
8,639+,;,))0
%2(;,))0
74%')6
The wheel kit is designed to greatly improve the portability of the generator. You will need the following tools to install the wheel kit: Pliers, 1/2" (13mm) wrench and a socket wrench with a 1/2" (13mm) socket.
NOTE:
The wheel kit is not intended for over-the-road use.
4
