9) Reinstall the Spider Stopper Guards. Slightly | Crossover® Ignition System Operations |
rotate the Spider Stopper Guards so that the | If the Crossover Ignition System fails to ignite the Left |
seams are in line with the Venturi fins(1). There | burner, light the Left burner with a match. If the Left |
should be no gaps in the seams or in the fit around | burner lights with a match, then check the Crossover |
the burners(2) and valves(3). | Ignition System. |
| ■ Check that both the white(1) and black(2) ignition |
| wires are attached properly. |
(1) |
|
| |
(3) |
|
| |
(2) | (1) | (2) | |
m CAUTION: If the Spider Stopper Guards do not |
|
| |
fit tightly, contact the Customer Service Represen- | ■ Check that the Crossover Ignition button pushes the | ||
tative in your region using the contact information | |||
igniter (button) down, and returns to the up position. | |||
sheet provided with your manual. | |||
■ Check to see if the igniter is loose in the frame. | |||
m WARNING: After reinstalling the gas lines, they | |||
Tighten if necessary; See Step “Install igniter” for | |||
should be leak checked with a soap and water | |||
correct procedure. |
| ||
solution before using the barbecue. (See Step: |
| ||
If the Crossover Ignition System still fails to light, | |||
“Check for gas leaks.”) | |||
Contact the Customer Service Representative in your | |||
| |||
| region using the contact information sheet provided | ||
| with your manual. |
| |
