C-1
Installing Features
Install the right trim piece with tool holders

You will need: Right trim piece with tool holders

Push the Right trim piece into the frame as shown(1),
making sure that the tabs on the underside of the trim
piece are snapped into the slots in the frame.(2)
Install the left end trim piece

You will need: End trim piece, two 1/2 inch bolts, two

nylon washers and a wrench

Slide the end trim piece into the frame as shown. Add
washer to bolt and put through frame and hole in
frame trim piece. Tighten with wrench.
Install the work surface

You will need: work surface.

Place the work surface, so that the front and back
edges fit over the frame, in the area between the left
trim piece and the cooking box as shown.
Do not use the work surface as a cutting board.
C001.b

(1)

(1) Make sure that the tabs on the side table are to the
right, next to the cooking box.
(2)
(1)