Installing the PortaDVD Driver Using the Windows Wizard
The following sections explain how to install the PCMCIA driver using the Windows Add New Hardware Wizard.
For Windows 98/Me/2000
The installation procedure for the PCMCIA Card Driver varies depending on the version of Windows 98/Me/2000 installed in your computer.
To install the driver on a Windows 98/Me/2000 system, follow these steps:
1.Insert the PCMCIA card into the PCMCIA card slot in your laptop computer.
The other end of the card/cable should already be connected to the interface connector on the PortaDVD. (For more information, see “Connecting the PortaDVD” on page 6.)
The system displays the initial Add New Hardware Wizard panel.
Figure 10. Add New Hardware Wizard
Note: The panels the Wizard displays are determined by your system con- figuration and your responses to the dialog. Do not be concerned if your installation process varies slightly from the one described. Please simply follow the dialog presented.
TEAC PortaDVD User’s Manual | 11 |
