Step 7: DISENGAGING THE DOOR FROM THE OPENER

AIn case of a power failure or if the door becomes obstructed.

•Pull the red carriage release knob to disengage the carriage from the opene (Figure 1)..

NOTE

Use caution if the door is open, the door may drop rapidly.

•Flip the carriage release lever up and raise or lower the door to re-engage the opener.

PULL THE RED RELEASE

HANDLE TO DISENGAGE THE

OPENER FROM THE DOOR

FLIP THE

CARRIAGE

RELEASE

LEVER UP

Figure 1 Operating the release mechanism

Step 8: MAINTENANCE

WARNING

Garage door hardware (springs, cables, brackets, pulleys, etc.) are under extreme pressure and tension. Do not attempt to adjust any door hardware. Call a qualified garage door installation professional.

WARNING

The garage door opener must not be installed on an unbalanced door. The opener’s internal force sensor will not function properly on an unbalanced door. Risk of seri- ous injury or death may result.

WARNING

Always perform the force safety test after making any adjustments to the opener.

CAUTION

Every year, check the door hardware for lubrication needs. Lubricate hinges, rollers and bearings according to manufacturer’s recommendation.

PERIODIC MAINTENANCE SCHEDULE

MONTHLY TASKS

ACheck the door’s balance

•Close the garage door.

•Disengage the door from the opener.

•Raise and lower the door manually.

–The door should move freely without sticking or binding.

•Raise the door halfway open.

–The door should remain relatively still.A slow movement is acceptable.

NOTE

If either of the above tests fail, call a professional garage door installer to repair the door.

BTest the Safe-T-Beam® System

•Close the garage door.

•Disengage the door from the opener.

•Start the opener to run the bullet to the open position.

•Start the bullet toward the close position and block the Safe-T-Beam®.

–The bullet should stop and reverse toward the open position.

•With the beam blocked,verify that constant pressure is required on the wall button to make the bullet move toward the close position.

–Release the pushbutton before the bullet stops and it should reverse to the open position.

•Verify that the remote control will not move the bullet in the down direction.

•If either test fails,adjust the beam and retest.See step 1,page 7.

CTesting the safety reverse

•Re-engage the door to the opener.

–Flip the carriage release lever up.

–Raise the garage door manually until the carriage engages with the bullet.

•Raise the door to the fully open position.

•Place a 2" x 4" board flat in the center of the garage door opening.

•Using the remote or wall button close the door.

–The door must reverse within 2 seconds of contacting the board.

•If the test fails,adjust the closing force and retest. (See Step 5, Page 11).

SEMI-ANNUAL TASKS

ACheck the belt tension (Figure 1).

•On the bullet, measure the tension spring length.

–It should be 1".

•If needed, turn the adjustment wheel until the tension spring is about 1" long.

–A flat blade screwdriver can be used to turn the adjustment wheel.

Figure 1 Belt tension

For Help, call 1-800-35-GENIE or visit www.geniecompany.com

13

Page 12 Page 14
Page 13
Image 13
Genie 3563435770, 2040L warranty Periodic Maintenance Schedule, Disengaging the Door from the Opener
Page 12 Page 14

2040L, 3563435770 specifications

The Genie 3563435770,2040L is a versatile, high-performance lift designed to meet the ever-evolving needs of construction, maintenance, and industrial applications. Engineered for efficiency and safety, this model stands out for its impressive specifications and innovative technologies.

One of the key features of the Genie 3563435770,2040L is its robust lifting capability. With a maximum working height of 40 feet, the lift allows operators to reach elevated workspaces with ease. The platform capacity is designed to support multiple workers and their tools, ensuring that tasks can be completed efficiently without compromising safety.

The lift incorporates Genie’s advanced hydraulic system, which provides smooth and responsive elevation. This enhances productivity on the job site while minimizing downtime. The system is also designed for energy efficiency, reducing the overall operational costs associated with lifting tasks.

In terms of mobility, the Genie 3563435770,2040L is equipped with all-terrain tires and a compact design, allowing it to navigate difficult terrains and fit into tight spaces. Operators can easily maneuver the lift on job sites, making it ideal for both indoor and outdoor applications. Additionally, the lift features a 360-degree rotating turntable, providing enhanced flexibility and reaching angles that are often challenging with traditional lifts.

Safety is paramount in the design of the Genie 3563435770,2040L. The model is equipped with numerous safety features, including automatic braking systems, anti-slip surfaces on the platform, and guardrails to ensure secure operation at heights. Emergency descent systems are also integrated, providing peace of mind for operators in case of malfunction.

The Genie 3563435770,2040L incorporates smart technology, such as an onboard diagnostics system that allows operators to monitor performance and conduct maintenance checks easily. This predictive maintenance capability minimizes downtime and prolongs the lifecycle of the equipment.

Furthermore, the lift's user-friendly controls make it accessible for operators of all experience levels. Training programs and operator manuals are readily available to facilitate smooth and safe operation.

In conclusion, the Genie 3563435770,2040L is an exceptional lift that combines power, efficiency, and safety. Its cutting-edge technologies and practical features make it a reliable solution for a wide range of lifting needs in various sectors.
Top Page Image Contents