OPERATION

OPERATION AND SAFETY GUIDELINES

WARNING

Your safety and the safety of those around you depends upon you using care and judgement in the operation of this equipment. Know the positions and functions of all controls before attempting to operate this machine. All equipment has limitations. Understand the speed, braking, steering, stability, and load chart characteristics of this machine before operating. Read the Operator's Manual and ask questions of your supervisor until you know the machine's limitations. It is very important to read, fully understand, and follow these operation and safety guidelines.

1.DO NOT operate this machine while people are under or near an elevated boom whether the boom is loaded or unloaded. Falling objects from the forks or attachment may cause serious injury or death.

2.ALWAYS remain completely within the cab enclosure while operating this machine. Falling debris can cause serious personal injury or death.

3.NEVER extend a load beyond the load chart band. Machine turn over, component damage, injury or death could occur.

4.ABSOLUTELY NO RIDERS SHOULD BE ALLOWED ON THIS MACHINE OR ATTACHMENTS.

5.NEVER lower a maximum load before retracting it. Machine turn over, component damage, injury or death could occur.

6.INSPECT and clear the working area of any obstructions (rocks, fence, wire, etc.) that could cause machine damage. If obstructions cannot be cleared, mark the obstructions with a stake or other marker that will be clearly visible to the operator.

7.DO NOT check the engine coolant level if the engine has recently been run. Injury could occur from escaping hot pressurized coolant.

8.ALWAYS wear the seat belt when operating this machine.

9.ALWAYS inspect the machine daily. Check for leaks, worn hoses, loose belts, or anything out of the ordinary. Repair and/or replace any worn, damaged or leaking parts immediately. Failure to do so can cause injury or death.

10.CHECK to be sure that all guards and screens are secure and in their proper place.

11.CHECK to be sure that all safety devices such as parking brake, service brake, level gauge, neutral start safety switch, back-up alarm, and horn are functioning properly. Always make sure mirror is adjusted properly.

12.DO NOT travel on terrain or in dangerous areas that could cause the machine to tip over.

13.DO NOT attempt to start the engine by towing or pushing. Damage to the powershift transmission could result.

14.CARRY A LOAD so that you have maximum machine stability and visibility is not obstructed.

15.ALWAYS level the machine as indicated on the machine level indicator before raising boom. Raising the boom with an unlevel machine may cause the machine to overturn causing injury or death.

16.USE the frame sway control to level the machine only when the boom position is horizontal or lower. Using the frame

sway control when the boom is higher than a horizontal position may cause the machine to overturn causing injury or death.

17.DO NOT depress the pump destroke button while operating the machine. This button should be used only during cold start ups. Depressing the button while operating the machine will cause an immediate loss of hydraulic power that will

affect fork tilt, lift, boom extend and retract, sway and all other hydraulic functions. Brakes will continue to function if the accumulator backup has a sufficient gas charge.

4 - 3

Page 40 Page 42
Page 41
Image 41
Genie GTH-644, GTH-844, GTH-842 manual Operation and Safety Guidelines
Page 40 Page 42

GTH-844, GTH-644, GTH-842 specifications

Genie, a leading manufacturer of aerial work platforms and material handling equipment, has a reputation for delivering powerful and reliable machines. Among their impressive lineup are the Genie GTH-842, GTH-644, and GTH-844 telehandlers, each designed to meet the diverse needs of construction and industrial environments.

The Genie GTH-842 telehandler is known for its exceptional lift capacity and versatility. With a maximum lift height of 42 feet and a load capacity of 8,000 pounds, the GTH-842 is capable of reaching high spaces while managing substantial loads. It features a 4-wheel drive system that ensures stability and traction on uneven terrain, making it an ideal choice for job sites where mobility is essential. Its hydrostatic transmission allows for smooth operation and easy maneuverability, giving operators the confidence to navigate tight spaces and challenging conditions. Additionally, the GTH-842 comes equipped with an optional 2-speed transmission, enhancing travel speed and efficiency.

The GTH-644 model is smaller yet robust, boasting a maximum lift height of 44 feet and a load capacity of 6,000 pounds. This telehandler is designed for operators who need a compact machine without compromising performance. Its tight turning radius and compact dimensions facilitate work in confined spaces, making it a favorite for residential construction and other projects where space is limited. The GTH-644 also features an advanced joystick control system that enhances user-friendliness, allowing operators to efficiently operate the machine with precision.

On the other hand, the Genie GTH-844 offers a combination of height and capacity, with a lift height of up to 44 feet and a maximum lift capacity of 8,000 pounds. This model is particularly adept at handling heavy materials while providing excellent reach. It includes a durable boom design that enhances stability, along with advanced hydraulic controls for improved responsiveness. The GTH-844 benefits from enhanced visibility due to its well-designed cab, allowing operators to have clear sightlines of their work area.

All three models incorporate Genie’s signature strength and durability, featuring robust construction and high-quality components. Safety is paramount, and Genie has integrated multiple features across these models, including advanced sway control and load sensing systems to prevent overload situations. Operators will also appreciate the easy access to maintenance points, ensuring that these machines can be serviced quickly and efficiently.

In conclusion, the Genie GTH-842, GTH-644, and GTH-844 telehandlers stand out in the marketplace due to their combination of performance, versatility, and user-friendly features. Whether working on construction sites, industrial tasks, or in tight spaces, these telehandlers are equipped to handle a variety of lifting and material handling challenges with ease. Genie continues to evolve its technology, ensuring that operators have access to machines that enhance productivity while prioritizing safety and efficiency.
Top Page Image Contents