ge.com
CleanSteel
Use a clean, soft, light and lightly dampened cloth, then dry thoroughly. Do not use appliance wax, polish, bleach or products containing any chemical agent on the CleanSteel surfaces.
Plastic Color Panels
Use a clean, soft, lightly dampened cloth, then dry thoroughly.
Door Seal
It’s important to keep the area clean where the door seals against the microwave. Use only mild,
Bottom
Clean off the grease and dust on the bottom often. Use a solution of warm water and detergent.
Replacing the light bulb.
Safety Instructions Operating Instructions Care
Remove screw.
Cooktop Light/Nite Light
Replace with a 120 volt, 40 watt (max.) halogen bulb. Order WB08X10051 from your GE supplier.
| To replace the cooktop light/nite light, | |
1 | ||
first disconnect the power at the main | ||
| ||
| fuse or circuit breaker panel, or pull | |
| the plug. | |
| Remove the screw from the side of the | |
2 | ||
light compartment cover and lower the | ||
|
cover until it stops.
3 Be sure the bulb is cool before removing. Break the adhesive seal by gently unscrewing the bulb.
4 Screw in the new bulb, then raise the light cover and replace the screw. Connect electrical power to the oven.
and Cleaning Troubleshooting Tips Consumer Support
27
