Accessories

 

 

 

 

 

 

 

 

 

 

 

 

Transmitter Compliance Statement

C

Programming the

 

 

 

 

 

 

 

 

 

Programming 1:

Remote Controls

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Adjustment 2:

Ch

Setting Contact

 

Reverse Function

 

 

NOTE

Limit Switch and Force Adjustments must be completed before checking the contact reverse function (Figure MA-3)..

NOTE

•Each Remote Control must be programmed separately..

•The Remote Controls will not cause the door Opener to close the garage door if the Safe-T- Beam® System is malfunctioning..

•When programming the Remote Controls, they must be at least 24” from the Antenna Wire..

•If the red Learn Indicator Light blinks approximately 4 times per second, programming has stopped.. If programming has stopped, repeat the above steps..

•Each Button on a 2 or 3 Button Remote Control is for a different Opener.. You cannot use more than one Button per Remote, per Opener..

•A maximum of seven Remote Controls or Wireless Keypads can be stored into the Receiver at one time.. If a Remote Control becomes lost, or if you want to delete a Remote Control or Wireless Keypad, see “To Erase All Receiver Memory..”

A To program one Button of a Remote Control (Figure MA-4):

• Locate Learn Button and Learn Indicator Light

on left side of Power Head (Figure MA-5)..

• Press and release Learn Button.. Red Learn

Indicator Light will blink 2 times per second..

• Press Remote Control Button once within 30

seconds.. Red Learn Indicator Light will stay lit..

• Press Remote Control Button again.. Red Learn

Indicator Light will go out, indicating that

memory is stored..

AOpen garage door using Wall Console..

BLay a 2” x 4” board flat in center of doorway..

CClose door using Wall Console..

DCheck that door stops and reverses within 2 seconds after it contacts board:

•If door does not reverse, decrease Close Force until door reverses..

•If door still does not reverse, move Limit Switch toward door..

ECheck Safe-T-Beam® System operation:

•If beam is blocked, door will not close..

Figure MA-3

2” x 4” board

laid flat

B Program each additional Remote using step A above

(up to seven)..

To Erase All Remotes from Power Head Memory

APress and hold Learn Button on Power Head for 10 seconds or until Learn Indicator Light goes out.. Memory is erased:

• Program Transmitter/Receiver again as needed..

To Replace Remote Control Battery

A

FOR NON-FLASHLIGHT MODELS

 

•

Pop off the back of the transmitter.

 

 

– Use coin, pen, screwdriver or any similar device.

 

 

– Replace old Battery with new coin type battery.

 

•

Replace back of remote.

B

FOR FLASHLIGHT MODELS

 

•

Slide open battery cover.

NOTE

The door must contact the 2” x 4” board before the Carriage activates the Close Limit Switch.. If not, readjust the Close Limit Switch..

– Replace old Battery with new AAA battery.

• Replace battery cover.

8

For Help, call 1-800-35-GENIE or visit www.geniecompany.com

Page 7 Page 9
Page 8
Image 8
Genie 2060, TRUE, 3060 Accessories, Transmitter Compliance Statement, Each Remote Control must be programmed separately
Page 7 Page 9

3060, 2060, TRUE specifications

The Genie TRUE, GPOWER 900, 1200, POWERLIFT 900, and 1500 are renowned products in the field of material handling, specifically designed to enhance efficiency and safety in various lifting applications.

The Genie TRUE is characterized by its innovative design that combines user-friendliness with advanced engineering. This model offers an impressive lift capacity while ensuring stability and performance. Its lightweight structure allows for easy maneuverability, making it ideal for both indoor and outdoor use. The Genie TRUE is equipped with a state-of-the-art control system that provides precise lifting, lowering, and positioning, ensuring maximum productivity for operators.

The GPOWER 900 and 1200 models stand out with their robust build and exceptional lifting capabilities. The GPOWER 900 is designed to handle loads up to 900 pounds, while the GPOWER 1200 can effortlessly lift up to 1200 pounds. Both models use advanced hydraulic systems for smooth operation, allowing for quick lifting cycles without compromising on power or safety. The ergonomic design of the GPOWER series minimizes operator fatigue, making it suitable for prolonged use in various work environments.

The POWERLIFT 900 and 1500 augment this lineup with their impressive features tailored for heavy-duty use. The POWERLIFT 900 can lift loads up to 900 pounds, making it ideal for medium-sized tasks. On the other hand, the POWERLIFT 1500 is engineered for heavier loads, boasting a capacity of 1500 pounds. Both models utilize cutting-edge overload protection technology, ensuring that safety is prioritized during use. Additionally, the POWERLIFT series features an intuitive interface that facilitates easy adjustments and control during operation.

Each of these models embodies the core values of Genie: reliability, innovation, and efficiency. They are designed to meet the varying demands of different industries, including construction, warehousing, and logistics. Their modular designs and interchangeable parts further enhance their versatility and longevity, making them a worthwhile investment for any business needing lifting solutions.

In summary, the Genie TRUE, GPOWER 900, 1200, POWERLIFT 900, and 1500 combine robust performance with safety and ease of use, making them ideal choices for any lifting task. Their reliability and advanced features are sure to meet the growing demands of modern workplaces.
Top Page Image Contents