light will flash rapidly.
Answering a call
If your headset is linked to your phone (headset icon displayed on your phone), and a call is incoming, you will hear a series of ring tones in the earpiece of the headset.
To answer a call:
1.Briefly press and release the MODE button.
If your headset is not linked to your phone, you will not hear the ring tones in your headset; however you can still transfer the incoming call to your headset at any time by by pressing and holding the PINCH button for 1 beep. It may take a few seconds longer to transfer.
To create a link
You can create a link to your phone at any time if one does not exist (provided it has been already paired).
1.Press and hold the PINCH button until you hear 1 beep.
2.Release the button immediately.
To end a call
1.Briefly press and release the MODE button.
Page 24 | © 2005 Gennum Corporation All rights reserved |
