Samsung SRD-1630, 870D, 1670 Setting the Protocol, Move to Connection Mode, and press Enter, Udp

using the DVR

~IP, Gateway, Subnet Mask, and DNS

-For <Static IP> : You can directly input IP address, Gateway, Subnet Mask and DNS.

-For <Dynamic IP> : IP address, Gateway, and Subnet Mask are set automatically.

-For <ADSL> : IP address, Gateway, and Subnet Mask are set automatically.

~User ID, Password : In case you selected ADSL, provide the “User ID” and its “Password”.

Connection Mode
Connection	Protocol
 Connection Mode	ADSL
 Bandwidth	600kbps
 IP	192.168. 1.200
 Gateway	192.168. 1.	1
 Subnet Mask	255.255.255. 0
 DNS	Manual	168.126. 63.	1
 User ID	ID
 Password	********
	OK	Cancel

M ` DNS server for <Dynamic IP> and <ADSL> can be set by user only if you selected <Manual>.

6.When the connection setup is done, press <OK>.

Setting the Protocol

3.	Use the up/down buttons (▲▼) in <Network> window to
		Connection Mode
	move to <Connection Mode>, and press [ENTER]
		Connection	Protocol
	button.
	Select <Protocol>.	 Protocol Type		TCP
4.		 Port(UDP)		8000 ~ 8159
		 Port(TCP)		554	~	557
		 Unicast/Multicast
5.	Use direction buttons (▲▼_ +) to move to a desired			Unicast
		 Multicast IP
				224.126. 63.	1
		 TTL
	item, and set the value.			5
		 Webviewer Port
				80
~ Protocol Type : Select the protocol type between TCP and
UDP.
				OK		Cancel

`If selected UDP, selections of Port (TCP), Port (UDP), and Unicast/ Multicast are activated.

~Port (TCP) : Initially, <554~557> is set. It increases / decreases by 4.

- TCP: It has better stability and lower speed when compared to UDP, and recommended for internet environments.

~Port (UDP) : Initially, <8000~8159> is set. It increases / decreases by 160.

- UDP : It has less stability and faster speed when compared to TCP, and recommended for local area network (LAN) environments.

~Unicast/Multicast : Select one between Unicast and Multicast. If selected Multicast, Multicast IP and TTL are activated.

- Unicast : Transfers data (UDP, TCP) individually to each connecting client.

- Multicast : Multiple client can receive the data (only in UDP) without putting additional traffic load to the network.

~Multicast IP : User can directly input.

~TTL : Select from 0 ~ 255. Initial value for the TTL is set to <5>.

~Webviewer Port : Enter the port number for the Web Viewer. Initially, it is set to <80>.

6.When the protocol setup is done, press <OK>.

62_ using the DVR