Samsung SRD-1630D, 870D, 1670D, 1650D, SRD-850D Event Monitoring, English, Stop alarm, seconds

Event Monitoring

This will display the channel in sync with a specific event (Sensor/Motion/Video Loss) if it occurs.

In “Monitor > Event Display”, set the event monitoring to ON/OFF and specify the event display time. (Page 52)

~If multiple events occur simultaneously, the screen will switch to a split mode.

-2~4 events : 4-split mode

-5~9 events : 9-split mode

-10~16 events : 16-split mode

~If the second event occurs within the set time of <Event Display>, the first event will last until the second one is terminated. (Page 52)

` Ex : If you set <Event Display> to 5 seconds, and only one event occurs in CH 1.

Event occurrence	5 seconds
	Stop alarm

CH1

`Ex : If you set <Event Display> to 5 seconds, and the second event occurs in CH 2 within the set time after the first event occurred in CH 1.

Event occurrence 4 seconds 9 seconds

Stop alarm

CH1 CH2

CH1

M ` Press the [ALARM] button to reset the alarm settings and to release the event mode.

`If an alarm activates in the condition you have set the event record, and pre/post alarm times, the event record will be performed.

`This will also apply to the Spot Out monitor.

! live

English _35