Samsung SRD-1650D, 870D, 1670D appendix, Continuous / Event Record If there is no event found

appendix

Symptom		Countermeasures
Recording does not work.	 If your player does not display a Live image at all, that indicates
	recording does not work so first check if you see an image on the
	screen.
	 Recording does not work if the recording settings are not properly
	configured.
	1) Manual Record: Press the [REC] button on the front panel of the DVR
	or on the remote control to start recording.
	2) Scheduled Record: Specify a desired time in Menu – Record -
	Recording Schedule. Recording will start at the specified time.
	-	<Continuous> Record: Recording will proceed in any conditions
	-	at the specified time.
		<Event> Record: When an event occurs, recording will perform
		only if the event is of alarm, motion detection and video loss.
	-	If there is no event found, recording will not perform.
		<Continuous / Event> Record: If there is no event found,
		Continuous recording will perform. Whereas, if an event occurs,
		Event recording will perform.
The image quality of the recording data is not good.	 Increase the resolution and quality level in Menu – Record – Quality /
	Resolution.
	1) Resolution: Select a bigger size when specifying the recording size.
	(4CIF>2CIF>CIF)
	The recording image in the CIF format shows a deteriorated quality
	as it is enlarged from a small-sized image.
	2) Record Quality: Specify a bigger level for the recording quality.
	 If you increase the resolution and the recording quality, the data size
	increases accordingly. So the HDD will be filled faster. Overwriting will
	overwrite the existing data so recording will proceed at a shorter
	interval.

112_ appendix