Samsung SRD-850D If adding HDDs to SRD-830D/850D/870D/1610D/1630D/1650D/1670D, installation

installation

. When the installation of additional HDDs is done, connect the power cable and connect the HDD signal cables (SATA Cable) to connectors  ~  on the main board.

` You can check the HDD map directly on the DVR. Refer to “Storage Device > HDD Map”. (Page 48)

` Note that the order the HDD data cable is connected will not affect the operation. The only consideration is the length of each cable.

` SRD-830/1610/1630 do not support DVD media.

If adding HDDs to SRD-830D/850D/870D/1610D/1630D/1650D/1670D

1.First, loosen the screws on both sides and remove the cover.

. Disconnect the power and HDD Signal cable from the existing HDDs, then loosen the screws (x4) in the left/right and upper sides and remove the upper brackets.

Cover

Upper Bracket

Lower Bracket

18_ installation