Owner’s Manual
Throttle wire/stop cord
Remove the air cleaner cover. (Fig.
Connect throttle wire end to carburetor. (Fig. 1
Cover throttle wire and stop cords together with protective tube provided up to air cleaner cover. (Fig. 1
Installation of blade guard (Fig. 1-8, 8B)
Install the blade guard on the drive shaft tube against the gear case.
Tighten the guard bracket firmly so that the blade guard does not swing or move down during operation.
When using a trimmer head (2), locate the guard above the gear case. (Fig.
CAUTION!
Some blade guards are equipped with sharp line limiters. Be careful when handling it.
6 |