Samsung SRD-830 Video Loss Detection, Alarm Schedule, Stop the alarm by canceling the schedule

Video Loss Detection

You can set the alarm to be generated on a camera disconnection, which causes a video loss.

Using the mouse may help make setup easier.
3. Use the up/down buttons (▲▼) in <Event> window to
	Video Loss Detection
move to <Video Loss Detection>, and press [ENTER]
	CH	Video Loss State 			Alarm 	Alarm Duration 
button.
	1	OFF			None	10 sec	
A window of video loss detection area setup appears.	2	OFF			None	10 sec	
	3	OFF			None	10 sec	
4. Use direction buttons (▲▼_ +) to move to a desired	4	OFF			None	10 sec	
	5	OFF			None	10 sec	
item, and set the value.	6	OFF			None	10 sec	
	7	OFF			None	10 sec	
~ Video Loss State : Sets whether to activate video loss	8	OFF			None	10 sec	
						Previous/Next Page
detection.
~ Alarm : Sets the alarm output method.				OK	Cancel

`For further information on alarm output, refer to “HDD Alarm > Alarm”. (Page 49)

~Alarm Duration : Sets the duration of alarm signal and alarm sound. 5. When the video loss detection setup is done, press <OK>.

Alarm Schedule

You can set the conditions and operating hours for scheduled alarms.

! using the dvr

Using the mouse may help make setup easier.

3.Use the up/down buttons (▲▼) in <Event> window to move to <Alarm Schedule>, and press [ENTER] button.

4.A window of <Alarm Schedule> settings appears.

5.Alarm : Sets the alarm output method.

`For further information on alarm output, refer to “HDD Alarm > Alarm”. (Page 49)

~<ON> : Marked in orange, and always generates alarm on scheduled time.

~<OFF> : Marked in white, no alarm is generated even if an event occurs.

Alarm Schedule
Alarm1
All	0	1	2	3	4	5	6	7	8	9	10	11 12 13 14 15 16 17 18 19 20 21 22 23
Sun
Mon
Tue
Wed
Thu
Fri
Sat
Hol
OFF			ON				Event Sync					Apply to All Alarm
									OK			Cancel

~Event Sync : Marked in Blue, generates alarm only when an event occurs.

~Apply to All Alarm : Applies the configured schedule to all alarms.

M	` When the alarm is generated on the scheduled time, you can
	stop the alarm by canceling the schedule.

6.When the Alarm Schedule setup is done, press <OK>.

Alarm Schedule

Alarm1
All	0	1	2	3	4	5	6	7	8	9	10	11	12	13	14	15	16	17	18	19	20	21	22	23
Sun
Mon		Apply to All Alarm
Tue
Wed							Apply the alarm scheduling to all?
Thu
Fri									OK				Cancel
Sat
Hol
OFF			ON				Event Sync											Apply to All Alarm

OK Cancel

English _59