Samsung SRD-1630, 870D, 1670D, SRD-850D, SRD-830D, SRD-1650D Formatting, HDD Alarm, English

OK Cancel

Formatting

You can format a storage device.

Using the mouse may help make setup easier.

3.Use the up/down buttons (▲▼) in <Device> window to move to <Storage Device>, and press [ENTER] button.

4.Select <Format>.

A window for selection of device for formatting appears.

5.Use direction buttons (▲▼_ +) to select a device to be formatted.

6.Select <Format> on the bottom of the screen.

Press <OK> on the “Manage” confirmation window will start formatting the selected device.

7.When the formatting is done, press <OK>.

Storage Device
Device	Format		HDD Alarm
Device	Select		Used/Total	Usage
HDD	1	12.28G/499.37G		Internal
				!
Format				using
		OK	Cancel	the dvr

Storage Device

Device		Format		HDD Alarm
Device		Select	Used/Total		Usage
HDD	1		12.28G/499.37G		Internal

Manage

Formatting deletes all recordings.

Proceed formatting?

OK Cancel

Format

OK Cancel

HDD Alarm

You can set alarm settings for HDD defects such as Check Alarm Output Port, Replace Alarm Output Port, and its duration.

Using the mouse may help make setup easier.

3.	Use the up/down buttons (▲▼) in <Device> window to
			Storage Device
	move to <Storage Device>, and press [ENTER] button.
				Device		Format		HDD Alarm
4.		HDD Alarm			Check Alarm Output Port		4		BEEP	All
	Select <	>.					1	2		3
	A window for setting HDD check and replace output ports
	and their durations appears.			 Duration			OFF
5.	Use direction buttons (▲▼_ +) to move to the desired			 Replace Alarm Output Port			1	2		3
							4		BEEP	All
				 Duration
	item.						OFF

~Alarm

- Alarm signal will output through the alarm out port on the rear side when selected <1>, <2>, <3>, and <4>.

- If <BEEP> was selected, a beep will sound.

- If <All> was selected, both beep sound and alarm signal through rear side ports will output.

~ Check Alarm Output Port : If HDD generates check alarm, the alarm signal will output to the specified alarm output port.

~ Replace Alarm Output Port : If HDD generates replace alarm, the alarm signal will output to the specified alarm output port.

English _49