Samsung SRD-830, 870D English, Contact the retailer or the service center for more information

Symptom		Countermeasures
I've found that the DVR does not recognize as many	 It takes time for the DVR to recognize multiple external HDDs. Try again
disks as installed when I have connected multiple	in a moment and if the problem (of failure to recognize as many HDDs
external HDDs to the DVR.	as connected) persists, it may occur due to a mechanical error of the
	HDD installed. Try again with a different HDD.
A message of “Need to reset date/time.” Is displayed	 This message is displayed if there occurs a problem with the time
on the screen.	setting of the internal clock or an error in the clock itself.
	Contact the retailer or the service center for more information.
The time bar is not displayed in Search mode.	 The timeline can switch between normal and extension mode.
	In extension mode, the time bar may not be displayed in the current
	timeline. Switch to normal mode or use the left or right button to
	navigate through the time bar.
The “NO HDD” icon and an error message are	 Check the HDD for connection. If the problem persists in a normal
displayed.	condition, contact the nearest service center to have the HDD checked
	by the service personnel.
I have installed an additional HDD on the DVR but it	 See the compatibilty list to check if the additional HDD is supported by
does not recognize the HDD.	the DVR. For the compatibility list, contact the retailer where you
	purchased the DVR.
I have connected an external storage device (external	 See the compatibility list of external storage devices to check if the
SATA HDD) to the DVR but the DVR seems not to	connected device is supported by the DVR.
recognize it.	For the compatibility list, contact the retailer where you purchased the
	DVR.
If I press the ESC key in full screen mode of the	 Press the ALT+TAB keys to select ‘ACTIVE MOVIE’ and press the ESC
WebViewer, the system does not switch to a normal
	key again. The system will switch to a normal split mode.
split mode.
I found it difficult to configure the network settings if	 For more information, refer to the user manual.
using the default search, backup and router settings.	 If you want to check the basics of the product for a quick start, refer to
	the quick start guide (backup, search).
	 If you use the router for network connection, refer to the “Connecting
	to the Internet using the router” section in this manual.
I forgot the password.	 Contact the DVR administrator for help.
Backup data is just not played by the PC or DVR.	 When you are backing up data, you have choices about the player
	either: PC or DVR. Make your selection before proceeding.
	 If you are using the PC to play the data, the format of the backup file
	should be either AVI or SEC.
	 If you are using the DVR for this purpose, formatting backup files should
	be done by the DVR.
My player does not switch to Live mode while in	 Press the Stop [@] button on the DVR or the remote control, or click the
playback.	[	] icon on the launcher to switch to Live mode.

DIX ! APPEN

English _111