Magnet Armature
(On Power)
Magnet
(Power Off)
GL-1200
Gate
Statement
The Electromagnetic Locks are totally sealed in an epoxy filled stainless steel case for
Wel offers up to 1200 pounds holding force with 12V DC power input (24V DC or 12/24V DC dual input voltage available by special order), it is the best choice for electronic security industry and system integrators.
Armature
Unique
When there is no power, there will be no holding force, and the
Waterproof Test:
Reference to IEC 60529 Edition 2.1:
Specifications
Voltage Tolerance: 15%
Current Draw: 460mA@12Vdc (at temperature 20C)
(Further notice for diverse input voltage on special order requirement)
Magnetic bond sensor monitor output
(SPDT rated 0.25A@12V DC), remotely monitors the door lock or unlock status. (N.C.
Operating Temperature:
Humidity: 0~95%
Lock's surface Temperature (when the power is on): <current temperature +20C
Holding Force: Up to 1200 lbs )545 Kg( Dimensions:
Magnet:(L) 202, (W) 62, (D) 40 mm Armature Plate:(L) 185, (W) 62, (D) 16 mm
Special Finishes for magnet and armature plate: Zinc
Epoxy Potting Compound: E87252 (S),
Weight )Approx.(: 4.8 Kg
GIANNI INDUSTRIES, INC.
No. 13, Zhong Sing Road,
Tel:
Website: gianni.tw
This series of Waterproof Magnetic Lock is made with epoxy potting compound and is protected by this compound. Also, GEM Waterproof Series Magnetic Locks have been proved to have withstood a water resistance as established in accordance with the test procedures of IPX7, IPX8 through a trusted third party. Therefore users need not worry that the lock will be rusted or sparked, if the lock is using in outdoor applications and installing in confined space where any inflammable gas.
Warranty
The product is warranted against defects in material and workmanship while used in normal service for a period of 5 year from the date of sale to the original customer. The GEM policy is one of continual development and improvement; therefore GEM reserves the right to change specifications without notice.
The products are manufactured under an ISO 9 0 0 1 & Q C 0 8 0 0 0 0 C e r t i f i e d Q u a l i t y Management Program environment back its product quality, performance and commitment to customer satisfaction.
Copyright 2008 Gianni industries, inc. All rights reserved.
